[Soekris] 4801 disk performance / pci slot

[Johannes Plunien]

Hi Stuart,
> That's the wrong way to plug it in. The correct way is to have the
> soldered plug where the metal of the case is; i.e. remove the metal
> spine from the card, and make a hole in the net4801 case for the
> port.
>   
just to be sure that i wont destroy my box i made some photos. On
picture [1] you can see the pci slot of my box. All plugs (eth0-eth2,
power, serial, ...) are on the right side of the box, as usual. The gap
is on the right side of the pci slot. My isdn card has 2 gaps as you can
see on picture [2]. So this is really the right way to plug in the card?
I'm confused because on a 'normal' PCs pci slot i would plug the card in
like on picture [3]

[1] http://www.pqpq.de/temp/soekris/DSC00060.JPG
[2] http://www.pqpq.de/temp/soekris/DSC00063.JPG
[3] http://www.pqpq.de/temp/soekris/DSC00062.JPG

sorry for the bad quality of the pictures... And please dont get me
wrong, i just want to be sure and not to destroy my box :)

-- 
Johannes Plunien | mailto:plu at pqpq.de | http://www.pqpq.de