[Soekris] 4801 disk performance / pci slot

[Stuart Henderson]

On 2006/12/30 11:08, Johannes Plunien wrote:
> but... my problem is, that it doesnt fit into the soekris box. It doesnt
> fail on the size, the problem is the soldered isdn cable plug. Lets take
> a look at the box like its on this picture [1]. If i plug in the avm
> fritz card the correct way, the isdn cable plug would point to the
> bottom of the picture and you would see the card from the backside

That's the wrong way to plug it in. The correct way is to have the
soldered plug where the metal of the case is; i.e. remove the metal
spine from the card, and make a hole in the net4801 case for the
port.

If the card is keyed so that it can't be plugged in this way, then
the card is keyed for 5v signalling.

The nfs speed isn't too surprising, run top(1) on the 4801 and you'll
probably see a lot of cpu time spent in interrupt.