[Soekris] Can't seem to boot after flashing BIOS

[Falcor]

Nevermind,  I figured bootdevice 80 needed to be added.  sorry to bother 
everyone.  :(

Falcor wrote:

>I have a 4801 and updated the BIOS from 1.21 to 1.28.  The box worked 
>perfectly with the 1.21 bios, but I needed to update it for some testing 
>with new code.  I have been booting off of a CF card.  Now when the 
>soekris boots the bios and reports:
>
>"No Boot device available, enter monitor."
>
>My current config looks like this:
>
> > show
>
>ConSpeed = 19200
>ConLock = Enabled
>ConMute = Disabled
>BIOSentry = Enabled
>PCIROMS = Enabled
>PXEBoot = Enabled
>FLASH = Primary
>BootDelay = 2
>FastBoot = Disabled
>BootPartition = Disabled
>BootDrive = 97 0B 00 00
>ShowPCI = Enabled
>Reset = Hard
>
>So many of these are new and undocumented in the online manuel.  Any 
>idea if the Boot Drive is set correctly, and if not what should it be to 
>have it check the CF card?  Thanks!
>_______________________________________________
>Soekris-tech mailing list
>Soekris-tech at lists.soekris.com
>http://lists.soekris.com/mailman/listinfo/soekris-tech
>  
>