[Soekris] Soekris 4801 and NanoBSD

[Niklas Saers]

Hi David,
I tried that out but unfortunately it gave the same result (actually,
no, it came to '-'). Do you have other suggestions I could try out?

Cheers

   Nik

On 12/1/06, David Cornejo <dcornejo at gmail.com> wrote:
> look for this line in nanobsd.sh
>
>        boot0cfg -B -b ${NANO_WORLDDIR}/boot/boot0sio -o packet -s 1 -m 3 ${MD}
>
> and remove the '-o packet'
>
> dave c
>
> On 11/30/06, Niklas Saers <niklassaers at gmail.com> wrote:
> > Hello,
> > I've bought a Soekris 4801 that I'm trying to install NanoBSD on with
> > a 2GB CF card. My custom config has been reduced to the following two
> > lines after very many failed compiles and installs:
> >
> > FlashDevice SanDisk 2G
> > customize_cmd cust_comconsole
> >
> > After dd'ing it to the CF card and booting, the boot manager comes up,
> > giving me the option of FreeBSD on F1 and F2. Choosing F1 the FreeBSD
> > menu will come up counting down to 9. Letting it count down the kernel
> > should load and be decompressed. But after it begins to load, the
> > loading only comes to  '/' before the 4801 hangs. Any suggestions to
> > what I might be doing wrong? The documentation was written for FreeBSD
> > 5.4 source code, and I'm using a recent cvsup from RELENG_6, so things
> > might have changed. Any suggestions for what I can do to push it
> > further?
> >
> > Cheers
> >
> >    Nik
> > _______________________________________________
> > Soekris-tech mailing list
> > Soekris-tech at lists.soekris.com
> > http://lists.soekris.com/mailman/listinfo/soekris-tech
> >
>