[Soekris] Soekris 4801 and NanoBSD

[David Cornejo]

look for this line in nanobsd.sh

       boot0cfg -B -b ${NANO_WORLDDIR}/boot/boot0sio -o packet -s 1 -m 3 ${MD}

and remove the '-o packet'

dave c

On 11/30/06, Niklas Saers <niklassaers at gmail.com> wrote:
> Hello,
> I've bought a Soekris 4801 that I'm trying to install NanoBSD on with
> a 2GB CF card. My custom config has been reduced to the following two
> lines after very many failed compiles and installs:
>
> FlashDevice SanDisk 2G
> customize_cmd cust_comconsole
>
> After dd'ing it to the CF card and booting, the boot manager comes up,
> giving me the option of FreeBSD on F1 and F2. Choosing F1 the FreeBSD
> menu will come up counting down to 9. Letting it count down the kernel
> should load and be decompressed. But after it begins to load, the
> loading only comes to  '/' before the 4801 hangs. Any suggestions to
> what I might be doing wrong? The documentation was written for FreeBSD
> 5.4 source code, and I'm using a recent cvsup from RELENG_6, so things
> might have changed. Any suggestions for what I can do to push it
> further?
>
> Cheers
>
>    Nik
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech
>