[Soekris] Asterisk FXO

[Steve Holdoway]

Any chance of a pointer to a .ISO to save me re-inventing the wheel??

Cheers,

Steve

On Sun, 20 Aug 2006 16:08:20 -0500
Jason Romo <jromo at networkguardian.net> wrote:

> I used X100P in the Soekris box.  I now use the Sipura2000 or Sipura 3000
> units.  The 2000 has 2 FXS and the 3000 has one FXO and one FXS.  You can
> add this to Asterisk on the Soekris box and the two don't need to be next to
> each other. I have about 10 working on a Soekris 4801.  I think you could
> get 15-20 phones behind one of these.  I have had 4 FXO port on it with 12
> users.  I have had 20 users with VOIP (IAX).
> 
> I am using my own build of Linux with 2.6.16 kernel and it is tuned for
> Asterisk.
> 
> Regards,
> Jason
> 
> 
> 
> 
> > From: "Marc A. Volovic" <marc at swiftouch.com>
> > Date: Sun, 20 Aug 2006 18:53:49 +0300
> > To: Kannaiyan Natesan <gbpnkans at gmail.com>
> > Cc: <soekris-tech at lists.soekris.com>
> > Subject: Re: [Soekris] Asterisk FXO
> > 
> > Quoth Kannaiyan Natesan:
> > 
> >> I did not get you. Have you used TDM400P card with FXO on 48xx. Is it
> >> working fine with 4 ports?. I was in the way of searching for a
> >> smaller mother board for this purpose. If this is cost saving, then i
> >> can go for soekris.
> > 
> > I used the TDM400P with a Routerboard 230, the TDM being populated with 3
> > FXO ports (not 4 and NOT FXS)...
> > 
> > The 12/5v connected is only required for the FXS ports, so the Soekris
> > should - in theory - have no problem running it, but I underline the fact
> > that I used a routerboard 230...
> > 
> >> Kannaiyan
> >> 
> >> On 8/20/06, Marc A. Volovic <marc at swiftouch.com> wrote:
> >>> Quoth Matt Ryanczak:
> >>> 
> >>>> I don't believe that a TDM400P will work in a 4801. For one the tdm400p
> >>> is a
> >>>> big card, it will not fit in the standard soekris case. Also, the TDM400p
> >>>> requires one of the big molex (12/5 volt) power connections from the PC
> >>>> power supply which the soekris can not provide with its default power
> >>> supply
> >>>> / setup.
> >>> 
> >>> Actually, it is the FXS cards that require 12v supplied to the card. I
> >>> have used a TDM400 with three FXO cards on a routerboard 230 (which is as
> >>> close to soekris 48xx as no matter).
> >>> 
> >>> --
> >>> ---MAV
> >>> Marc A. Volovic                                         marc at swiftouch.com
> >>> Swiftouch, LTD                                             +972-544-676764
> >>> 
> > 
> > -- 
> > ---MAV
> > Marc A. Volovic                                         marc at swiftouch.com
> > Swiftouch, LTD                                             +972-544-676764
> > _______________________________________________
> > Soekris-tech mailing list
> > Soekris-tech at lists.soekris.com
> > http://lists.soekris.com/mailman/listinfo/soekris-tech
> 
> 
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech