[Soekris] Asterisk FXO

[Marc A. Volovic]

Quoth Kannaiyan Natesan:

> I did not get you. Have you used TDM400P card with FXO on 48xx. Is it
> working fine with 4 ports?. I was in the way of searching for a
> smaller mother board for this purpose. If this is cost saving, then i
> can go for soekris.

I used the TDM400P with a Routerboard 230, the TDM being populated with 3
FXO ports (not 4 and NOT FXS)...

The 12/5v connected is only required for the FXS ports, so the Soekris
should - in theory - have no problem running it, but I underline the fact
that I used a routerboard 230...

> Kannaiyan
> 
> On 8/20/06, Marc A. Volovic <marc at swiftouch.com> wrote:
> >Quoth Matt Ryanczak:
> >
> >> I don't believe that a TDM400P will work in a 4801. For one the tdm400p 
> >is a
> >> big card, it will not fit in the standard soekris case. Also, the TDM400p
> >> requires one of the big molex (12/5 volt) power connections from the PC
> >> power supply which the soekris can not provide with its default power 
> >supply
> >> / setup.
> >
> >Actually, it is the FXS cards that require 12v supplied to the card. I
> >have used a TDM400 with three FXO cards on a routerboard 230 (which is as
> >close to soekris 48xx as no matter).
> >
> >--
> >---MAV
> >Marc A. Volovic                                         marc at swiftouch.com
> >Swiftouch, LTD                                             +972-544-676764
> >

-- 
---MAV
Marc A. Volovic                                         marc at swiftouch.com
Swiftouch, LTD                                             +972-544-676764