[Soekris] Asterisk FXO
Kannaiyan Natesan
gbpnkans at gmail.com
Sun Aug 20 15:37:09 UTC 2006
Marc,
I did not get you. Have you used TDM400P card with FXO on 48xx. Is it
working fine with 4 ports?. I was in the way of searching for a
smaller mother board for this purpose. If this is cost saving, then i
can go for soekris.
Kannaiyan
On 8/20/06, Marc A. Volovic <marc at swiftouch.com> wrote:
> Quoth Matt Ryanczak:
>
> > I don't believe that a TDM400P will work in a 4801. For one the tdm400p is a
> > big card, it will not fit in the standard soekris case. Also, the TDM400p
> > requires one of the big molex (12/5 volt) power connections from the PC
> > power supply which the soekris can not provide with its default power supply
> > / setup.
>
> Actually, it is the FXS cards that require 12v supplied to the card. I
> have used a TDM400 with three FXO cards on a routerboard 230 (which is as
> close to soekris 48xx as no matter).
>
> --
> ---MAV
> Marc A. Volovic marc at swiftouch.com
> Swiftouch, LTD +972-544-676764
>
More information about the Soekris-tech
mailing list