[Soekris] Asterisk FXO

[Ken]

On 8/17/06, Jason Clark <jason at jasonandjessi.com> wrote:
> Asterisk runs on the WRT54G, so Im sure it will run on a Soekris board.
> Now, how many calls you can terminate, that is a different story. Im
> installing asterisk on a Net4521 once my CF card shows up, I'll post if
> it works.

I have been running it on 4801 for quite some time without any
problems. However I am only using SIP and IAX connections, no FXO. Its
been fine with the light call volume it handles. No more than 2 to 3
simultaneous.

-Ken
>
> Kannaiyan Natesan wrote:
> > Hi Graham,
> >
> > Thanks for your input.
> > You don't need a SPA 3000 when you have a motherboard with PCI Slot.
> > You can add an asterisk FXO card to cover that process. I don't think
> > SIPURA is of that much good quality in voice compared to asterisk FXO.
> >
> > Regards,
> > Kannaiyan
> >
> > On 8/18/06, Graham Menhennitt <gmenhennitt at optusnet.com.au> wrote:
> >
> >> Kannaiyan Natesan wrote:
> >>
> >>>     I want to have 4 port asterisk FXO card to go with asterisk. What
> >>> is the suitable motherboard from soekris and How would i buy them?
> >>>
> >>>
> >> I am not an expert on this but I have doubts that any Soekris card is
> >> powerful enough to do the analogue processing for VoIP. I do it by
> >> off-loading the analogue bit to a Sipura SPA 3000 which I connect to a
> >> Soekris net4801. For 4 ports you'd need 4 Sipuras and I don't know
> >> whether it could handle that many.
> >>
> >> Graham
> >>
> >>
> > _______________________________________________
> > Soekris-tech mailing list
> > Soekris-tech at lists.soekris.com
> > http://lists.soekris.com/mailman/listinfo/soekris-tech
> >
> >
> >
>
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech
>


-- 
Ken Caruso
ken at ipl31.net