[Soekris] Asterisk FXO

[Jason Clark]

Asterisk runs on the WRT54G, so Im sure it will run on a Soekris board. 
Now, how many calls you can terminate, that is a different story. Im 
installing asterisk on a Net4521 once my CF card shows up, I'll post if 
it works.

Kannaiyan Natesan wrote:
> Hi Graham,
>
> Thanks for your input.
> You don't need a SPA 3000 when you have a motherboard with PCI Slot.
> You can add an asterisk FXO card to cover that process. I don't think
> SIPURA is of that much good quality in voice compared to asterisk FXO.
>
> Regards,
> Kannaiyan
>
> On 8/18/06, Graham Menhennitt <gmenhennitt at optusnet.com.au> wrote:
>   
>> Kannaiyan Natesan wrote:
>>     
>>>     I want to have 4 port asterisk FXO card to go with asterisk. What
>>> is the suitable motherboard from soekris and How would i buy them?
>>>
>>>       
>> I am not an expert on this but I have doubts that any Soekris card is
>> powerful enough to do the analogue processing for VoIP. I do it by
>> off-loading the analogue bit to a Sipura SPA 3000 which I connect to a
>> Soekris net4801. For 4 ports you'd need 4 Sipuras and I don't know
>> whether it could handle that many.
>>
>> Graham
>>
>>     
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech
>
>
>