[Soekris] 4826 and Power over Ethernet
Konstantin.Kabassanov at lip6.fr
Wed Aug 2 21:36:50 UTC 2006
Be really careful, because Cisco uses inverted +/- polarity in with their
POEs. I have a several number of Soekris 4521 boxes working fine with
standard POE injectors. With these injectors, I had to buy special rj45
cables in order to make work cisco APs.
http://www.hyperlinktech.com/web/poe.php#cables and look for CA-POE-02
Konstantin K. KABASSANOV
8, rue du Capitaine Scott
75015 Paris, France
Phone: +33 (0) 1 44 27 71 26
Fax: +33 (0) 1 44 27 74 95
E-mail: konstantin at kabassanov.com
IMPORTANT! If you have tried to reply to this mail and you received a
stupid message, announcing that the mail had been rejected as spam,
please, resend your reply to the address above.
The certificate used to sign this e-mail can be verified at:
Mediocrity is the worst kind of failure...
> -----Message d'origine-----
> De : soekris-tech-bounces at lists.soekris.com [mailto:soekris-tech-
> bounces at lists.soekris.com] De la part de Gass, Richard
> Envoyé : mercredi 2 août 2006 21:18
> À : David Young; soekris-tech at lists.soekris.com
> Objet : Re: [Soekris] 4826 and Power over Ethernet
> Ok, so that confirms that there is nothing wrong with my device:) They
> claim on their website that "Supports Power over Ethernet according to
> the 802.3af standard" at http://www.soekris.com/net4826.htm. I have
> sent them an email to see what they have to say about this too. I will
> keep you posted on their reply.
> >-----Original Message-----
> >From: soekris-tech-bounces at lists.soekris.com
> >[mailto:soekris-tech-bounces at lists.soekris.com] On Behalf Of
> >David Young
> >Sent: 02 August 2006 20:07
> >To: soekris-tech at lists.soekris.com
> >Subject: Re: [Soekris] 4826 and Power over Ethernet
> >On Wed, Aug 02, 2006 at 07:57:23PM +0100, Gass, Richard wrote:
> >> Has anyone had problems getting a 4826 to power up when
> >connecting to a
> >> PoE capable switch? I have seen on one site that Soekris do not
> >> properly implement the standard. I have a Cisco AP that is working
> >> correctly using PoE and when I plug the 4826, it will not turn on.
> >> However, if I connect a D-Link-P50 inline, it works fine.
> >The Soekris 4826 does not implement the 802.3af standard. Personal
> >experience is that it will not power-up when I plug one into an
> >802.3af-complicant switch, which is just what I expect.
> >David Young OJC Technologies
> >dyoung at ojctech.com Urbana, IL * (217) 278-3933
> >Soekris-tech mailing list
> >Soekris-tech at lists.soekris.com
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 3745 bytes
Desc: not available
Url : http://lists.soekris.com/pipermail/soekris-tech/attachments/20060802/35f91fdb/smime-0001.bin
More information about the Soekris-tech