[Soekris] Problem with USB-Card

[Frank Kensy]

i try to use a usb-card on one of the two PCMCIA/Cardbus-slot but modprobe 
says only:

modprobe usb-ohci
PCI: No IRQ known for interrupt pin A of device . Please try using 
pci=biosirq.
usb-ohci.c: found OHCI device with no IRQ assigned. check BIOS settings!
PCI: No IRQ known for interrupt pin B of device . Please try using 
pci=biosirq.
usb-ohci.c: found OHCI device with no IRQ assigned. check BIOS settings!
/lib/modules/2.4.31/kernel/drivers/usb/host/usb-ohci.o: init_module: No such 
device
Hint: insmod errors can be caused by incorrect module parameters, including 
invalid IO or IRQ parameters
/lib/modules/2.4.31/kernel/drivers/usb/host/usb-ohci.o: 
insmod /lib/modules/2.4.31/kernel/drivers/usb/host/usb-ohci.o failed
/lib/modules/2.4.31/kernel/drivers/usb/host/usb-ohci.o: insmod usb-ohci failed