[Soekris] Ubiquity 400mW mini-PCI

[Jim Thompson]

Um, those are WRAP boards, and this is a Soekris list.  :-)

On Oct 6, 2005, at 10:35 AM, Vincent Immler wrote:

> maybe this link helps:
>
> http://www.exergia.biz/ptp/exap-GMF.htm
>
> spoggle wrote:
>
>
>>
>>
>> Make sure you're using an appropriate power supply.  That radio  
>> will draw almot 5W by itself.  I use 10-12W supplies for the board  
>> alone, I would use an 18-20W supply with a 400mW radio installed.   
>> Even then, you might still run into problems if the traces to the  
>> socket don't supply enough current.
>>
>> dave c
>>
>> On 10/6/05, *Mike Ireton* <mike-soekris at tiedyenetworks.com  
>> <mailto:mike-soekris at tiedyenetworks.com>> wrote:
>>
>>     Iwan Kilis wrote:
>>
>>     > Hi All,
>>     >
>>     > I am new to this forum, and been looking for some answer  
>> about what
>>     > Soekris board can support Ubiquity 400mW mini-PCI Cards.
>>
>>
>>     I had to step the one on my 4826 down to 200mw, otherwise, the  
>> board
>>     would reboot as soon as clients associated and started passing
>>     traffic.
>>
>>     _______________________________________________
>>     Soekris-tech mailing list
>>     Soekris-tech at lists.soekris.com <mailto:Soekris- 
>> tech at lists.soekris.com>
>>     http://lists.soekris.com/mailman/listinfo/soekris-tech
>>
>>
>> --------------------------------------------------------------------- 
>> ---
>>
>> _______________________________________________
>> Soekris-tech mailing list
>> Soekris-tech at lists.soekris.com
>> http://lists.soekris.com/mailman/listinfo/soekris-tech
>>
>>
>
> _______________________________________________
> Soekris-tech mailing list
> Soekris-tech at lists.soekris.com
> http://lists.soekris.com/mailman/listinfo/soekris-tech
>