[Soekris] Ubiquity 400mW mini-PCI

[Vincent Immler]

maybe this link helps:

http://www.exergia.biz/ptp/exap-GMF.htm

spoggle wrote:

>
>
> Make sure you're using an appropriate power supply.  That radio will 
> draw almot 5W by itself.  I use 10-12W supplies for the board alone, I 
> would use an 18-20W supply with a 400mW radio installed.  Even then, 
> you might still run into problems if the traces to the socket don't 
> supply enough current.
>
> dave c
>
> On 10/6/05, *Mike Ireton* <mike-soekris at tiedyenetworks.com 
> <mailto:mike-soekris at tiedyenetworks.com>> wrote:
>
>     Iwan Kilis wrote:
>
>     > Hi All,
>     >
>     > I am new to this forum, and been looking for some answer about what
>     > Soekris board can support Ubiquity 400mW mini-PCI Cards.
>
>
>     I had to step the one on my 4826 down to 200mw, otherwise, the board
>     would reboot as soon as clients associated and started passing
>     traffic.
>
>     _______________________________________________
>     Soekris-tech mailing list
>     Soekris-tech at lists.soekris.com <mailto:Soekris-tech at lists.soekris.com>
>     http://lists.soekris.com/mailman/listinfo/soekris-tech
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Soekris-tech mailing list
>Soekris-tech at lists.soekris.com
>http://lists.soekris.com/mailman/listinfo/soekris-tech
>  
>