[Soekris] sensors data - Temperature

Farid Hajji farid.hajji at ob.kamp.net
Wed Jul 20 02:00:17 UTC 2005


On Tue, Jul 19, 2005 at 04:16:32PM -0600, Jim Cromie wrote:
> on linux 2.6.12, on debian stable (sarge), with i2c-sensors,
> and Henrik Brix's sensors file,
> http://dev.gentoo.org/~brix/papers/net4801/net4801.html#sect-kernel-temp-volt

You may want to check out env4801, which reports accurate data
on FreeBSD:

http://phk.freebsd.dk/soekris/env4801/

> ERROR: Can't get FAN2 data!
> Temp:       +113 C  (low  =   -55 C, high =  +127 C)
> Critical:   +127 C
> 
> the temp isnt right - right after booting, it reads 97'C IIRC.
> heres the formulas in the sensors.conf:
> 
> anyone got similar numbers ?
> or have a different sensors.conf ??

That's definitely wrong. Typical would be like:

VREF = 1.235  V245 = 2.450
Temp 2 (status=0x81)   56 C
Volt  1 VCORE 174  2.057 V scale  1.0   2.057 V +/- 0.0118 V
Volt  2 VCC   216  2.553 V scale  2.0   5.106 V +/- 0.0236 V
Volt  3 VPWR   51  0.603 V scale 20.1  12.116 V +/- 0.2376 V
Volt  4 +12V  216  2.553 V scale  4.8  12.331 V +/- 0.0571 V
Volt  5 -12V  213  2.518 V scale 19.2  48.318 V +/- 0.2268 V
Volt  6 GND     0  0.000 V scale  1.0   0.000 V +/- 0.0118 V
Volt  7 Vsb   141  1.667 V scale  2.0   3.333 V +/- 0.0236 V
Volt  8 Vdd   141  1.667 V scale  2.0   3.333 V +/- 0.0236 V
Volt  9 Vbat  255  3.014 V scale  1.0   3.014 V +/- 0.0118 V
Volt 10 AVdd    0  0.000 V scale  2.0   0.000 V +/- 0.0236 V

Regards,
-Farid.



More information about the Soekris-tech mailing list