[Soekris] voltage/temperatur sensors and net4801

Poul-Henning Kamp phk at phk.freebsd.dk
Sat Sep 25 18:35:19 UTC 2004


In message <4155B717.1040500 at penguin-breeder.org>, Jochen Eisinger writes:
>Hi,
>
>I'm trying to use the sensors soldered on the net4801 to monitor
>voltages/temperatures on my board. Reading the registers of the chip
>appears to work without problems. However, I have no idea, what those
>values are (i.e. which voltages). Furthermore, the temperatures appear
>to be very high (>70°C) or are interpreted as voltages.
>
>>From what I read from other mailings, there is information from soekris
>>From what I read from other mailings, there is information from soekris
>required, i.e. which voltages the chip is measuring, and what formulas
>are used to calculate the temperatures.
>
>How long will it take before this information is released? Or did I miss
> a post there?

http://phk.freebsd.dk/soekris/env4801/

-- 
Poul-Henning Kamp       | UNIX since Zilog Zeus 3.20
phk at FreeBSD.ORG         | TCP/IP since RFC 956
FreeBSD committer       | BSD since 4.3-tahoe    
Never attribute to malice what can adequately be explained by incompetence.



More information about the Soekris-tech mailing list