[Soekris] Has anyone ever gotten m0n0Wall loaded on the Soekris net4526-30?

David Witten wittend at wwrinc.com
Sat Oct 30 22:19:34 UTC 2004


Stuart Henderson wrote:

>Have you tried the method I worked out for you via flashboot yet? It
>worked very smoothly when I tried it.
>  
>
Well, Ihave now tried it, and it is much simpler than I first imagined.  
But I still have a problem that I don't know how ro address.  As you can 
see, apart from having a more recent board with different  amounts of  
ram and flash, my results resemblre yours closely until I get to the 
part that says:

    root on rd0a
    rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
    ********* flashboot 0.5
    Error: No flash device found, using default config

Any suggestions?

Thanks,
-- Dave.

#=== boot transcript ===

OpenBSD 3.5-stable (kbuild) #0: Thu May  6 22:09:09 EST 2004
    djm at shitei.mindrot.org:/home/djm/code/flashboot/obj/kbuild
cpu0: AMD Am486DX4 W/B or Am5x86 W/B 150 ("AuthenticAMD" 486-class)
cpu0: FPU
real mem  = 66695168 (65132K)
avail mem = 48726016 (47584K)
using 839 buffers containing 3436544 bytes (3356K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 20/40/12, BIOS32 rev. 0 @ 0xf7840
pcibios0 at bios0: rev. 2.0 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc8000/0xa000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
elansc0 at pci0 dev 0 function 0 "AMD ElanSC520 PCI" rev 0x00: product 0 
steppin
g 1.1, CPU clock 133MHz, reset 1<PWRGOOD>
"Intersil PRISM2.5 Mini-PCI WLAN" rev 0x01 at pci0 dev 16 function 0 not 
configu
red
"Hifn 7955/7954" rev 0x00 at pci0 dev 17 function 0 not configured
sis0 at pci0 dev 18 function 0 "NS DP83815 10/100" rev 0x00: DP83816A, 
irq 5, ad
dress 00:00:24:c2:b6:c0
nsphyter0 at sis0 phy 0: DP83815 10/100 integrated, rev. 1
isa0 at mainbus0
isadma0 at isa0
kbc selftest: ffffffff
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <064MB ATA Flash Disk>
wd0: 1-sector PIO, LBA, 61MB, 125056 sectors
wd0(wdc0:0:0): using BIOS timings
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask 4000 netmask 4020 ttymask 4020
rd0: fixed, 20480 blocks
wd0: no disk label
dkcsum: wd0 matched BIOS disk 80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
********* flashboot 0.5
Error: No flash device found, using default config
building ps databases: dev.
net.inet.tcp.ecn: 0 -> 1
ddb.panic: 1 -> 0
ddb.console: 0 -> 1
kern.splassert: 0 -> 2
pf enabled
starting network
Daemons:  syslogd identd inetd cron.
********* finished /etc/rc






More information about the Soekris-tech mailing list