[Soekris] connect on serial port

[Ciprian Niculescu]

yes, this was the easyest :-)

10x

C

On Fri, 20 Feb 2004 16:33:54 -0500, "Peter Radcliffe" <pir at pir.net> said:
> Matthew Rideout <mrideout at windserve.com> probably said:
> > You need to configure FreeBSD to use the serial port as its console  
> > using the settings that you wish to connect at.
> 
> The easiest way is just to change the bios of the soekris board to do
> console at 9600 which is freebsd's (and most other thing's) default
> speed.
> 
> I did it that way because all my serial console servers are set up
> for 9600 and it's easier to have one standard.
> 
> P.
> 
> -- 
> pir
> 
> _____________________________________________________________________
> Soekris Engineering, technical discussion mailing list
> [un]subscribe: http://lists.soekris.com/mailman/listinfo/soekris-tech