[Soekris] connect on serial port

[Peter Radcliffe]

Matthew Rideout <mrideout at windserve.com> probably said:
> You need to configure FreeBSD to use the serial port as its console  
> using the settings that you wish to connect at.

The easiest way is just to change the bios of the soekris board to do
console at 9600 which is freebsd's (and most other thing's) default
speed.

I did it that way because all my serial console servers are set up
for 9600 and it's easier to have one standard.

P.

-- 
pir