[Soekris] 4801 manual, hard drive

[Wim Vandeputte]

On Tue, Aug 10, 2004 at 11:10:07PM -0500, Peter Seebach wrote:
> Er.  The manual barely even hints at the 2.5" hard drive.  How's this work,
> then?  Can I use it and the CF both?  What should I be telling my kernel to
> look for; two IDE controllers?

there is one IDE bus on which you have 2 devices:

one CF and one 2.5" HD

pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N020ATMR04-0>
wd0: 16-sector PIO, LBA48, 19077MB, 39070080 sectors
wd1 at pciide0 channel 0 drive 1: <Hitachi XXM2.3.0>
wd1: 1-sector PIO, LBA, 488MB, 1000944 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1(pciide0:0:1): using PIO mode 1

This means you must use a jumper on the HD to switch between master/slave
and in the BIOS, you must set the environment variable 'FLASH' to either
primary or secundary.

http://soekris.kd85.com/images/tn/DSC02115.JPG.html

Wim.