[Soekris] net4801 headers / GPIO

[shane@bogomip.com]

Much appreciated Soren ;)

On Wed, Sep 03, 2003 at 01:54:58PM -0700, Soren Kristensen wrote:
> Hi Everybody,
> 
> Give me a little more time, and a detailed net4801 manual will come out....
> 
> 
> Regards,
> 
> 
> Soren
> 
> shane at bogomip.com wrote:
> 
> >Actually there is a different pin count on that header from the 4501 and 
> >the 4801..
> >The 4801 has more GPIO.. as far as resources go.. google isn't turning up 
> >any valid results
> >on using the SC1100 GPIO at all.. and the SC1100 pdf from natsemi isn't 
> >pointing me in the right direction.
> >
> >what bugs me is that there seems to be linux supoprt for the scx200 gpio 
> >pins.. however they are not detecting according to the
> >module load.
> >
> >Shane
> >
> >On Tue, Sep 02, 2003 at 04:15:58PM -0700, Jay Doscher wrote:
> >
> >>On the 6 pin connector on the motherboard, 4 pins are for voltage, and 2
> >>pins are for the GPIO.  Check the PDF's for the 4501, and as far as I
> >>know, the pinouts are the same as for the 4801.  As far as the use of
> >>GPIO, I am sure there are resources out there for it apart from the
> >>soekris machine.
> >>
> >>Jay
> >>
> >>
> >>>-----Original Message-----
> >>>From: soekris-tech-admin at lists.soekris.com 
> >>>[mailto:soekris-tech-admin at lists.soekris.com] On Behalf Of 
> >>>shane at bogomip.com
> >>>Sent: Tuesday, September 02, 2003 4:11 PM
> >>>To: William S Kish
> >>>Cc: soekris-tech at lists.soekris.com
> >>>Subject: Re: [Soekris] net4801 headers / GPIO
> >>>
> >>>
> >>>I kinda thought somebody would have mentioned the procedures 
> >>>already,  I know I have posted and another person has posted 
> >>>much earlier in the list about this same thing.
> >>>
> >>>I will easily learn whatever it is I need to learn.. but the 
> >>>SC1100 reference PDF I have been looking thru isn't telling 
> >>>me or I am reading over what I need to find out more about 
> >>>getting it to happen.
> >>>
> >>>Shane
> >>>
> >>>On Tue, Sep 02, 2003 at 02:29:00PM -0700, William S Kish wrote:
> >>>
> >>>>Does anyone have the specs for the net4801 headers, in 
> >>>
> >>>particular for 
> >>>
> >>>>GPIO?
> >>>>
> >>>>Thanks,
> >>>>-Bill
> >>>>
> >>>>__________________________________
> >>>>Do you Yahoo!?
> >>>>Yahoo! SiteBuilder - Free, easy-to-use web site design software 
> >>>>http://sitebuilder.yahoo.com 
> >>>>
> >>>
> >>>_____________________________________________________________________
> >>>
> >>>>Soekris Engineering, technical discussion mailing list
> >>>>[un]subscribe: 
> >>>
> >>>http://lists.soekris.com/mailman/listinfo/soek> ris-tech
> >>>
> >>>
> >>>_____________________________________________________________________
> >>>Soekris Engineering, technical discussion mailing list
> >>>[un]subscribe: http://lists.soekris.com/mailman/listinfo/soekris-tech
> >>>
> >>
> >>_____________________________________________________________________
> >>Soekris Engineering, technical discussion mailing list
> >>[un]subscribe: http://lists.soekris.com/mailman/listinfo/soekris-tech
> >
> >_____________________________________________________________________
> >Soekris Engineering, technical discussion mailing list
> >[un]subscribe: http://lists.soekris.com/mailman/listinfo/soekris-tech
> >
> >.
> >
> 
> _____________________________________________________________________
> Soekris Engineering, technical discussion mailing list
> [un]subscribe: http://lists.soekris.com/mailman/listinfo/soekris-tech