[Soekris] Re: Patch to Elan520/Soekris 45xx support in FreeBSD-current
pikofarad at bredband.net
Mon Nov 24 03:29:04 UTC 2003
Good work! Do you know of any programming documentation on the net4801 GPIO
or current work going on to support it in *BSD?
/ Peter Fors
"Poul-Henning Kamp" <phk at phk.freebsd.dk> wrote in message
news:9626.1069612801 at critter.freebsd.dk...
> The major new things are:
> ELAN_XTAL option now called CPU_ELAN_XTAL
> ELAN_PPS option now called CPU_ELAN_PPS
> /dev/led/error for the error LED.
> More LEDs can be configured on the GPIO pins, for instance:
> sysctl machdep.elan_gpio_config="-----LLLE--lp--------LL---------"
> Configures active high LEDS on GPIO5,6,7,21 & 22, an active low LED
> on GPIO11. These will appear as devices "/dev/led/gpio5" etc.
> The 'p' on GPIO12 and 'E' on GPIO8 are PPS input and PPS-echo
> configurations (enabled by CPU_ELAN_PPS option).
> The led(4) interface is of course not only useful with lamps, you
> can use it with any sort of gadget connected to a GPIO pin.
> I can not guarantee that these patches will make it into FreeBSD 5.2.
> Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
> phk at FreeBSD.ORG | TCP/IP since RFC 956
> FreeBSD committer | BSD since 4.3-tahoe
> Never attribute to malice what can adequately be explained by
> Soekris Engineering, technical discussion mailing list
> [un]subscribe: http://lists.soekris.com/mailman/listinfo/soekris-tech
More information about the Soekris-tech