[Soekris] (no subject)

Sasa Vender sasavi at yahoo.com
Wed Nov 12 15:15:58 UTC 2003


Hi,

I have a problem. I can't make init to run on serial
console.
I have soekris net4521, RH9, kernel 2.4.20-8, init
2.84,
lilo.conf looks like
... serial=0,19200n8 ...
...append="console=ttyS0,19200n8"...

/dev/console is c 5 1
/dev/ttyS0 is c 4 64
 
kernel is configured with console over serial port

I followed instructions in Remote-Serial-HOWTO,
edited /etc/initttab, /etc/sysconfig/init,
/etc/sysconfig/kudzu.
I can see lilo and kernel messages but wen init is
about to start
I see nothing.
Does anyone know what could be the problem? 
Thanks
It looks like this:



POST: 012345d6789bcefghiajklnopq,,,tvwxy
                                                      
                         
comBIOS ver. 1.15  20021013  Copyright (C) 2000-2002
Soekris Engineering.
                                                      
                         
net45xx
                                                      
                         
0064 Mbyte Memory                        CPU 80486 133
Mhz
                                                      
                         
Pri Mas  Transcend                       LBA 984-16-16
 126 Mbyte
                                                      
                         
PXE-M00: BootManage UNDI, PXE-2.0 (build 082)
                                                      
                         
Slot   Vend Dev  ClassRev Cmd  Stat CL LT HT  Base1   
Base2   Int
-------------------------------------------------------------------
0:00:0 1022 3000 06000000 0006 2280 00 00 00 00000000
00000000 00
0:17:0 104C AC51 06070000 0107 0210 10 3F 82 A0000000
020000A0 10
0:17:1 104C AC51 06070000 0107 0210 10 3F 82 A0001000
020000A0 10
0:18:0 100B 0020 02000000 0107 0290 00 3F 00 0000E101
A0002000 11
0:19:0 100B 0020 02000000 0107 0290 00 3F 00 0000E201
A0003000 05
                                                      
                         
 5 Seconds to automatic boot.   Press Ctrl-P for
entering Monitor.
                                                      
                         
LI
LILLOO  LLooaaddiinngg 
LLiinnuuxx......................................
                                                      
                         
Linux version 2.4.20-8-soekris-2003-10-16
(root at Ra.login.net) (gcc version 3.2.3BIOS-provided
physical RAM map:
 BIOS-e801: 0000000000000000 - 000000000009f000
(usable)
 BIOS-e801: 0000000000100000 - 0000000004000000
(usable)
64MB LOWMEM available.
On node 0 totalpages: 16384
zone(0): 4096 pages.
zone(1): 12288 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=Linux ro root=301
BOOT_FILE=/boot/vmlinuz-rInitializing CPU#0
Calibrating delay loop... 66.56 BogoMIPS
Memory: 61232k/65536k available (1130k kernel code,
3404k reserved, 947k data, )Checking if this processor
honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 8192 (order: 4, 65536
bytes)
Inode cache hash table entries: 4096 (order: 3, 32768
bytes)
Mount cache hash table entries: 512 (order: 0, 4096
bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384
bytes)
Page-cache hash table entries: 16384 (order: 4, 65536
bytes)
CPU: AMD 486 DX/4-WB stepping 04
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.00 entry at 0xf00e1, last
bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society
NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
Serial driver version 5.05c (2001-07-08) with
MANY_PORTS SHARE_IRQ SERIAL_PCI edttyS0 at 0x03f8 (irq
= 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
RAMDISK driver initialized: 16 RAM disks of 4096K size
1024 blocksize
netlog: using network device <<NULL>>
netlog: network device <NULL> does not exist,
aborting.
Uniform Multi-Platform E-IDE driver Revision:
7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
hda: Transcend, CFA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: task_no_data_intr: status=0x51 { DriveReady
SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError
}
hda: 251904 sectors (129 MB) w/0KiB Cache,
CHS=984/16/16
Partition check:
 hda: hda1
Linux Kernel Card Services 3.1.22
  options:  [pci] [cardbus] [pm]
Intel PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind
8192)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (512 buckets, 4096 max) - 292
bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Yenta IRQ list 0000, PCI irq10
Socket status: 30000006
Yenta IRQ list 0000, PCI irq10
Socket status: 30000006
 hda: hda1
 hda: hda1
 hda: hda1
 hda: hda1
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 64k freed


__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
http://antispam.yahoo.com/whatsnewfree



More information about the Soekris-tech mailing list