[Soekris] 4501 doesn't boot

Punky Tse punkytse at punknix.com
Fri Jul 25 16:13:28 UTC 2003

Punky Tse wrote:

> Hi all,
> After a series of plug-and-unplug of power for rebooting, my working 
> 4501 cannot be boot again.  Could anybody know how could it be 
> recover?  What I can now see is that when I plug the power supply, 
> both power and activity led are on.  But by my experience, the power 
> led would be on and the error led will also be on for a few 
> seconds.... and there is no data come from serial port when I plug the 
> power.  It seemed that I have broken my board.  Anybody here has this 
> experience before?  I am very upset at the moment... 
> Punky

what I can find now is that Net1 and Net2 interface has both link and 
act are on, and the three network interface chipset is very hot.  
Anybody could offer help?


> _____________________________________________________________________
> Soekris Engineering, technical discussion mailing list
> [un]subscribe: http://lists.soekris.com/mailman/listinfo/soekris-tech

More information about the Soekris-tech mailing list