[Soekris] booting from usb port for 4801

[Jay Doscher]

My personal favorite is a part time use pc that I have laying around + a
cf->ide adapter.  The adapters run about $20-$30 out there, if you're
interested. Hope this helps.

Jay

> -----Original Message-----
> From: soekris-tech-admin at lists.soekris.com 
> [mailto:soekris-tech-admin at lists.soekris.com] On Behalf Of 
> Gordon Chalmers
> Sent: Wednesday, September 03, 2003 8:58 PM
> To: soekris-tech at lists.soekris.com
> Subject: [Soekris] booting from usb port for 4801
> 
> 
> Hi,
> Looking forward to the 4801 manual...
> but until then
> 
> Is it possible to boot from the usb port in the 4801?
> i.e. from a usb cdrom drive?
> 
> if so, is it by using the INT19 codes, (like the hard drive.. boot 80)
> 
> I ask mainly for an easy openbsd installation on the hard 
> disk from cd. (i.e. no CF writing, due to no cf writer...)
> 
> Gordon Chalmers
> Kestral Computing
> 
> _____________________________________________________________________
> Soekris Engineering, technical discussion mailing list
> [un]subscribe: http://lists.soekris.com/mailman/listinfo/soekris-tech
>