[Soekris] V35 board
nathan at iwantka.com
Mon Aug 26 18:24:18 UTC 2002
Read again. http://www.sbei.net/archive/datasheets/wanadapt1t1e1_ds.pdf
It does "3.3v or 5.0v".
I'm currently using one in a 4501 with no issues.
----- Original Message -----
From: "Paul Cox" <paul at mentat.com>
To: <soekris-tech at lists.soekris.com>; <nathan at iwantka.com>
Sent: Monday, August 26, 2002 12:39 PM
Subject: Re: [Soekris] V35 board
> You must not be using these sbe cards in a soekris box as the specs
> refer to the electrical requirements as 5 Amps at 5 volts. I didn't
> think the PCI slot on the 4501 provided anything but 3.3v.
> At 14:11 23/08/2002 -0500, Nathan Littlepage wrote:
> >I'm using DS1 cards from SBE.
> >They also make a V.35 board.
> >Both have xBSD drivers.
More information about the Soekris-tech